Alfa Romeo 166 2.4 Multijet 20V (Manual)

In the late 1990s, Alfa Romeo was experiencing a renaissance. After years of uncertainty, the Milanese brand, under the tutelage of the Fiat Group, was in the midst of renewing its range, a process initiated in 1994 that would culminate in the acclaimed Alfa Romeo 156. What was missing, however, was the jewel in the crown: a new flagship, an executive sedan capable of taking the Cuore Sportivo to the elitist E-Segment, ruled with an iron fist by the German rivals BMW 5 Series and Mercedes-Benz E-Class. This monumental mission was entrusted to the Alfa Romeo 166.

Presented to the world in 1998, the 166 was not just a successor to the successful Alfa Romeo 164; it was a statement of intent. Its proposal was based on a complex duality: the combination of heritage and character. The heritage allowed it to compete in terms of luxury, technology, and substance with the best in the segment, satisfying a demanding client seeking comfort and prestige. The character, in turn, was what set it apart, the promise that a large and elegant sedan did not need to sacrifice its soul and driving pleasure. It was the "older sister" of the 156, sharing its award-winning vigor and sporty feel, but wrapped in a package of executive sophistication. The 166 was designed to be a rewarding experience both for those driving it on a winding road and for passengers on a long journey, seeking a delicate balance that would define its entire trajectory.

The Challenge of Succession

Replacing the Alfa Romeo 164 was a daunting task. Designed by the Pininfarina studio and launched in 1987, the 164 was a commercial and image success for the brand, with approximately 273,857 units produced throughout its life. It was a car that combined bold Italian design with a modern platform (the "Tipo 4", shared with the Fiat Croma, Lancia Thema, and Saab 9000), and its successor needed to raise the bar even higher.

The development of what would become the 166 began early, around 1990. The initial idea, however, was much more modest: a project codenamed "RT" (Restyling Total), which aimed only at a profound update of the 164. Design proposals were presented by both Pininfarina and the Alfa Romeo Centro Stile, the brand's in-house design studio.

Walter de Silva's Vision

The proposal from the Centro Stile, led by the then-rising designer Walter de Silva, prevailed over Pininfarina's. However, the top management of Fiat Auto, especially CEO Paolo Cantarella, made a strategic decision: instead of merely modernizing the 164, Alfa Romeo would create an entirely new car from scratch. Thus, "Project 936" was born, the true precursor to the 166.

This move represented a crucial turning point. Historically, Alfa Romeo frequently relied on large external design studios, the carrozzerie, for its top-tier models. By rejecting proposals from established names like Pininfarina, Bertone, and Italdesign in favor of an internal solution, Fiat was making a bold bet: to consolidate a cohesive and modern brand identity, totally controlled by the company. This strategy was already evident in the almost parallel development of the 156, and the 166 would follow the same architectural philosophy, with a high waistline and slender profile, establishing a familiar design language.

The project was developed on the "Tipo E" platform, which also served as the basis for the Lancia Kappa. However, to ensure the car had the dynamic behavior expected of an Alfa Romeo, engineers made radical modifications, especially to the suspension, adopting a sophisticated double-wishbone scheme at the front and multilink at the rear. The initial inspiration for the concept came from a sketch of an Alfa coupe drawn by Wolfgang Egger, which Cantarella asked the team to "scale" to the dimensions of an executive sedan.

The design process, however, was not without conflict. Years later, Walter de Silva himself would reveal in an interview that the final design of the 166 was not his preferred proposal. He was reportedly compelled by Fiat management to reprise an older concept. This corporate imposition on the creative vision may explain the polarizing nature of the first generation's design. The controversial small headlights, which became the car's most criticized feature, may be a remnant of this older design, a compromise that perhaps did not perfectly align with de Silva's ultimate vision. The car, therefore, was born not from a pure vision, but from a concession, a fact that may have contributed to its mixed reception in the market.

Officially launched in late 1998, the Alfa Romeo 166 arrived on the market as a sedan that exuded personality, for better or worse. It was a sculpture on wheels that refused to be anonymous, even if that meant dividing opinions.

Exterior Design: A Controversial Sculpture

Walter de Silva's design for the 166 was fluid and muscular, with a high waistline, relatively small windows, and broad shoulders that gave the four-door sedan an undeniable coupe profile. The bodywork, 4.72 meters long and 1.81 meters wide, looked firmly planted on the ground, transmitting a sense of strength and authority.

The front end, however, was the most controversial point and defined the public perception of the car. The intentionally small headlights created a "sleepy look" that many considered disproportionate to the vehicle's size. The traditional scudetto (the heart-shaped grille) was elegantly integrated into the hood, and striking creases flowed toward the bumper, which, unlike the 156, allowed for the license plate to be mounted in the center, a more conventional and harmonious solution. The rear was short, with a gentle slope that evoked agility, and the tapered taillights were a design element shared with other models of the brand at the time.

Interior: A Sanctuary for the Driver

If the exterior was polarizing, the interior was almost universally acclaimed. The dashboard design created the sensation of separate cocoons for the driver and passenger, with the center console prominently angled toward the driver, reinforcing the focus on driving pleasure. The quality of materials was a notable leap forward compared to the 164, with soft-touch plastics and leather upholstery options from the prestigious Italian brand MOMO for the top trims, called "Super".

The major technological highlight was the ICS (Integrated Control System), an advanced system for its time that centralized, on a five-inch color LCD screen, the controls for the audio system, automatic climate control, trip computer, and, optionally, a GSM phone and satellite navigation system (which was not functional in Brazil). The top versions ("Super" and, later, "Lusso") came equipped with features such as 17-inch alloy wheels, rain sensor, cruise control, and electrically adjustable seats.

Note: Power and performance figures may vary slightly depending on the model year and emissions standards (Euro 2/3). Automatic versions (Sportronic) generally featured slightly slower acceleration times.

More than any other component, the engines defined the personality of the Alfa Romeo 166. The range offered was a reflection of the brand's rich engineering tradition, providing options that ranged from technological efficiency to pure visceral emotion.

The Legendary "Busso" V6

At the core of the 166 experience was the iconic "Busso" V6 engine, an engineering masterpiece designed by Giuseppe Busso. This engine was revered not only for its robust performance, but for being a true piece of mechanical art. With its chromed and polished intake manifolds, it was an engine as beautiful to look at as it was to listen to. Its sound, especially at high revs, was a metallic, guttural, and melodic symphony, frequently compared to an Italian opera, which became the soul of the car for many enthusiasts.

In the 166, the Busso was available in three gasoline variants:

• 2.5 V6 24V: The entry point into Alfa's world of six cylinders, offering a balance between performance and smoothness.
• 3.0 V6 24V: The main engine, which equipped the top versions and was the only option offered in Brazil. With up to 226 hp, it provided vigorous performance and transformed the 166 into an authentic grand tourer.
• 2.0 V6 12V Turbo: A version with lower displacement but with a turbocharger, created primarily for the Italian market to bypass tax legislation that penalized engines over 2.0 liters. Despite its reduced size, it delivered 205 hp and impressive torque at low revs.

The production of the last Busso engine, on December 31, 2005, marked the end of an era for Alfa Romeo. In a tragic coincidence, its creator, Giuseppe Busso, passed away just a few days later, on January 3, 2006.

Twin Spark (TS) Technology

The entry-level engine was the 2.0 Twin Spark 16V, an inline four-cylinder that carried the legacy of Alfa's famous bialbero (twin-cam) engines. Its technology was sophisticated, employing two spark plugs per cylinder, a phase variator on the camshaft, and a variable geometry intake manifold. These features aimed to optimize fuel combustion across the entire rev range, resulting in an engine with good torque at low revs and eager to rev high.

Despite being a technically advanced engine praised for its liveliness, many critics and owners considered its 155 hp only adequate to move the 166's more than 1,400 kg. To extract truly sporty performance, it was necessary to keep the engine at high revs, which impacted fuel consumption. Additionally, the timing belt of this engine became a well-known weak point, requiring preventive changes at shorter intervals than recommended by the factory to avoid catastrophic failures.

The Pioneering 2.4 JTD

For the European market, where diesel engines were gaining increasing importance, Alfa Romeo equipped the 166 with the 2.4 JTD inline-five engine. This powertrain was one of the pioneers in the use of second-generation common-rail technology, which allowed for more precise and efficient fuel injection. The result was a notably refined diesel engine for its time, with low levels of noise and vibration, and a generous torque of over 300 Nm available from low revs, making it ideal for long highway journeys.

The choice of engine, however, implied a fundamental compromise in the driving experience. The heavy Busso V6, mounted transversely over the front axle, gave the car a tendency to understeer when pushed to the limit in corners. Furthermore, its power and torque, unleashed on the front wheels, resulted in noticeable torque steer, the sensation of the steering wheel "pulling" to one side during hard acceleration. In contrast, the 2.0 Twin Spark engine, being significantly lighter, relieved the weight on the front axle. This resulted in a more agile car, with more neutral and communicative steering, truer to Alfa Romeo's ideal of dynamic balance. The buyer was therefore forced into a choice that defined the personality of their car: the soul, sound, and performance of the V6, sacrificing a bit of handling purity, or the agility and balance of the Twin Spark, giving up the power and unparalleled charisma of the Busso.

In September 2003, at the Frankfurt Motor Show, Alfa Romeo presented a restyled version of the 166. Designed by Daniele Gaglione of the Centro Stile, the facelift was more than just a simple aesthetic update; it was a course correction, a direct and assertive response to the main criticisms that had limited the success of the original model.

The Corrective Facelift

The most drastic and welcome change occurred at the front of the car. The controversial small headlights were replaced by significantly larger, more aggressive optical units with optional bi-xenon projectors, which gave the 166 an imposing presence that the previous model lacked. The scudetto also grew in size and prominence, and the hood and bumper were completely redesigned to integrate the new assembly. The result was a front end that not only resolved the main design complaint but also aligned the flagship with the visual identity established by the successful 147 and 156, creating a strong and cohesive family image. The rear, on the other hand, remained practically unchanged, receiving only minor updates to the contours of the taillights and the bumper.

Technical and Engine Evolution

The changes were not limited to aesthetics. The engine range was reconfigured to increase the car's appeal:

• New Range-Topper: The manual 3.0 V6 engine was succeeded by the new and more powerful 3.2 V6 24V "Busso". Derived directly from the acclaimed GTA versions of the 147 and 156, this engine delivered 240 hp and 289 Nm of torque, transforming the 166 into a high-performance sedan capable of reaching 245 km/h.
• Powerful Diesel: The 2.4 JTD engine was profoundly updated. With the adoption of a new 20-valve cylinder head and Multi-Jet technology (which allows multiple fuel injections per cycle), its power jumped to 175 hp, positioning it as one of the most powerful five-cylinder diesel engines in its class at the time.
• Adjustments to the Range: The 2.0 V6 Turbo engine, with its limited appeal to specific markets, was discontinued. The 3.0 V6 engine was kept, but only in conjunction with the Sportronic automatic transmission. Additionally, the 6-speed manual gearbox became standard for the 2.0 TS and 3.2 V6 versions, improving both sportiness and highway efficiency.

New Trims and the TI Package

The interior also received improvements, with new materials, color combinations, and a metallic-effect finish on the center console, giving it a more modern feel. The big news was the introduction of the TI (Turismo Internazionale) sports package. This package added a touch of aggressiveness to the elegant sedan, including suspension lowered by 15 mm, exclusive 18-inch alloy wheels, sports seats upholstered in black leather with the TI logo embroidered in red, aluminum door sills, and red dashboard lighting.

Note: Performance data may vary. The 2.4 JTD engine also had a 185 hp version in its final years of production. The 2.5 V6 engine was discontinued in some markets after the facelift.

Market Context

The history of the Alfa Romeo 166 in Brazil is the chronicle of a niche car in a challenging market. After the reopening of imports in 1990, Alfa Romeo officially returned to the country, starting with the 164, which won over a loyal audience. By the end of the 1990s, when the 166 was preparing to arrive, the luxury sedan segment in Brazil was a battlefield. Domestic models like the Chevrolet Omega and Vectra still had a strong presence, but competition from newly arrived German imports, such as the BMW 5 Series and Mercedes-Benz E-Class, was redefining expectations for technology, performance, and prestige.

The Arrival and Strategy

The Alfa Romeo 166 was launched in Brazil in 1999. Faced with a relatively low-volume market for luxury cars and high import and homologation costs, Fiat, the brand's official importer, adopted a focused and pragmatic strategy. Instead of offering the wide range of engines and trims available in Europe, the company opted to bring a single, fully-loaded version: the 3.0 V6 24V, equipped exclusively with the 4-speed "Sportronic" sequential automatic transmission.

This decision was logical from a business standpoint. The chosen version was the one with the highest prestige and profit margin, positioned to compete directly with six-cylinder German sedans in the minds of Brazilian consumers. The car came with a very generous equipment package, including digital air conditioning, a sunroof, leather seats with power adjustments and heating, and the sophisticated LCD screen of the ICS system. The absence of a more accessible entry-level option, like the 2.0 Twin Spark, or the manual transmission for purist enthusiasts, limited the model's reach, but solidified its image as an absolute luxury product.

Sales and Exclusivity

The initial launch of the 166 in Brazil was a surprising success. The first batch of 60 units, imported in June 1999, sold out immediately, exceeding Alfa Romeo's own expectations. However, this initial momentum was not sustained. The total volume of sales throughout its life cycle in the country was extremely low. According to data from the Alfa Romeo Club of Brazil, only 143 units of the 166 were officially sold.

To this number are added a few units that were directly imported by Fiat for use by its board of directors. These cars, after a period of corporate use, were sold in the used market, carrying a unique history valued by collectors.

The Legacy in Brazil

The low sales volume turned the Alfa Romeo 166 into an instant rarity on Brazilian streets. Today, it is a modern classic, coveted by enthusiasts and collectors who value its exclusivity, its Italian design, and the driving experience provided by the Busso V6 engine.

Its trajectory in Brazil also has a symbolic meaning. Official imports of Alfa Romeo to the country ended in 2005/2006, shortly after the end of the 166's commercial life in Europe. This means that the 166 was not only the brand's last large sedan sold globally for many years; in Brazil, it represents the "swan song" of Alfa Romeo's official presence for over a decade. Its current rarity is a direct reflection not only of its modest sales, but of the very end of an important chapter in the brand's history in the country.

The Alfa Romeo 166 ended its production in June 2007, without a direct successor, leaving a vacuum in the brand's executive sedan segment that would only be filled nearly a decade later with the arrival of the Giulia. Its legacy is complex: that of a technically competent and aesthetically bold car, but one that failed to conquer the market.

Production Numbers and Commercial Performance

The production of the 166, carried out at the Rivalta and Mirafiori plants in Italy, never reached the expected volumes. Throughout its nine-year lifespan, less than 100,000 units were manufactured. This number, when put into perspective, reveals the extent of its commercial failure. Its predecessor, the 164, sold over 273,000 units, almost triple that amount.

The reasons for this failure are multifactorial. The controversial design of the first phase certainly alienated more conservative buyers in the executive segment. The overwhelming competition from German sedans, which at the time were solidifying their reputation for quality and reliability, was an immense obstacle. Alfa Romeo's own reputation, still marred by reliability issues from the past, weighed against the decision to purchase an expensive luxury car. Furthermore, misguided strategic decisions, such as the unavailability of diesel engines for right-hand drive markets like the UK, fatally limited its appeal in the crucial corporate fleet sector. The failure of the 166 was so significant that Alfa Romeo effectively abandoned the segment for more than a decade, canceling its planned successor, Project 169.

Strengths vs. Weaknesses

The 166 is a car of extremes, loved by its defenders and criticized by its detractors for equally valid reasons.

Strengths

• Design: Especially after the 2003 facelift, the 166 is considered one of the most elegant and timeless sedans of its era, with pure lines and a distinct presence.
• Driving Pleasure: True to the brand's tradition, it offered refined driving dynamics, with quick steering and a sophisticated suspension that made it more engaging than most competitors focused on comfort.
• Busso V6 Engine: The heart of the car, a source of performance, charisma, and above all, an intoxicating sound that is an experience in itself.
• Interior and Equipment: It offered a luxurious, driver-centric environment with a very generous list of standard equipment for its price.
• Exclusivity and Value for Money: Due to its steep depreciation and rarity, today it represents an accessible way to acquire an Italian luxury sedan with unique performance and style.

Weaknesses

• Reliability and Maintenance: Like many Alfas of its era, it suffered from a reputation for complex and expensive maintenance. Electrical gremlins, premature wear of suspension components, and leaks were common complaints.
• Chronic Issues: The need for rigorous and preventive timing belt changes on the Twin Spark engines was a critical point. In some European markets, floor pan corrosion also proved to be an issue.
• Depreciation: It was one of the cars that lost value most rapidly in the market, a nightmare for first owners, but a blessing for used buyers.

Current Status

Today, the Alfa Romeo 166 is a modern classic, a "misunderstood car" that is finally receiving the recognition it was denied when new. Ignored by the majority, it is now valued by a niche of enthusiasts who appreciate its beauty, its rarity, and the authentic, soulful driving experience it provides — something increasingly rare in a world of efficient but sterile automobiles. It is a car that demands passion and dedication, but rewards its owner with unparalleled character. In a curious epilogue to its history, the 166 platform was sold in 2008 to the Chinese manufacturer GAC Group, and its engineering DNA survived in models like the Trumpchi GA5, an unexpected fate for the last great sedan from Arese.