Alfa Romeo Giulia GT

The Alfa Romeo Giulia Sprint GT (Tipo 105) was presented to the public in September 1963, initially at the Arese plant and, shortly thereafter, at the Frankfurt Motor Show. Designed as the natural successor to the acclaimed Giulietta Sprint of the 101 series, this new sports coupe was penned by the young Giorgetto Giugiaro, who at the time worked for the Bertone studio. The Giulia line featured larger displacement engines and much more modern engineering for the time, positioning itself as the Italian manufacturer's sportiest and most desired option.

The development of the Tipo 105 was based on a shortened version of the Giulia sedan chassis, reducing the wheelbase from 2,510 mm to 2,350 mm. This structural alteration was fundamental in giving the coupe exceptional agility in corners and a balanced weight distribution, characteristics that became trademarks of the model.

The most striking and debated visual element of the early versions of the Giulia GT was the "scalino" (an Italian term meaning "step"). This gap of approximately one centimeter, located between the front part of the hood and the radiator grille, arose from a design clearance that ended up not being corrected before the start of mass production. What could have been seen as an assembly defect became a symbol of visual identity highly valued by collectors.

During this first phase, the models also featured other design peculiarities that changed over time:

• Rear wheel arches: On units manufactured until mid-1967, the rear wheel arches were lower, being raised in later versions to align with the height of the front fenders.
• Instrument panel: The first models used a simple, flat dashboard. From 1968 onwards, Alfa Romeo adopted a dashboard with the speedometer and tachometer dials housed in two protruding circular cowls (known in Italy as "cannocchiale" or binoculars).

The hood with the "scalino" step began to be phased out with the arrival of the 1750 GT Veloce model in 1967, which introduced the "smooth front", where the hood integrated directly into the fenders without any gap. The entry-level models, known as GT Junior, retained the stepped front until they received this same aesthetic update in 1970.

In 1964, Alfa Romeo decided to offer a four-seater convertible option based on the Sprint GT coupe. As Bertone's production capacity was fully exhausted, the design and assembly of the convertible were transferred to Carrozzeria Touring in Milan, receiving the official designation "Giulia GTC" (GT Convertible).

Engineering Challenges and Structural Rigidity

The removal of the hardtop and the steel side pillars drastically compromised the car's resistance against torsion. To solve this problem, Touring added several metal reinforcements in strategic sections of the bodywork. These reinforcements were modified and improved throughout the car's short production period. The great merit of the project was keeping the vehicle's final weight extremely low, fluctuating between 905 kg and 950 kg, which preserved the sporty performance and agile dynamics of the hardtop car.

Visuals and the End of Carrozzeria Touring

The Giulia GTC featured a folding canvas soft top that was completely hidden when retracted, retractable rear side windows, and an exclusive matte black dashboard finish (replacing the textured gray of the coupe). On the trunk lid, it displayed the written logo "GiuliaGTC".

Carrozzeria Touring was facing severe financial difficulties during this period and closed its activities shortly after completing the manufacturing of this model. Because of this, the Giulia GTC went down in history as the last official project carried out by the legendary Milanese coachbuilder. Only 1,003 units were produced (including about 99 to 100 right-hand drive examples for the UK and South African markets).

The Tipo 105 coupe line evolved through two main branches: the high-performance line (GT and GTV) and the lower-cost entry-level line (GT Junior).

Giulia Sprint GT (1963–1966)

The debut model used the bodywork with the "scalino" hood and flat dashboard. It was powered by the 1.6-liter Twin Cam engine fed by two Weber 40 DCOE twin-choke carburetors, generating 106 horsepower.

Giulia Sprint GT Veloce (1965–1968)

Launched to bring more refinement to the lineup, the 1.6-liter GT Veloce (GTV) received an updated engine with larger exhaust valves. This raised the power to 109 horsepower and significantly increased torque at low revs, making the driving more vigorous. The model retained the "scalino" body style.

1750 GT Veloce (1967–1972)

This version marked the first major aesthetic restyling and profound mechanical evolution of the line. The "scalino" hood was abandoned and replaced by the smooth front equipped with four circular headlights (two larger ones at the ends and two smaller ones in the inner grille).

To optimize dynamic behavior and high-speed control, the suspension was geometrically recalibrated and received a rear anti-roll bar. The 15-inch wheels were replaced by 14-inch diameter wheels, but wider (5.5 inches), allowing for the fitting of better-performing tires.

The 1750 GTV was divided into two distinct phases:

• Series 1 (1967–1969): Maintained the brake and clutch pedals hinged to the floorpan and the clean bumpers. Examples exported to the United States from 1969 onwards received the SPICA mechanical fuel injection system to comply with local emission rules.
• Series 2 (1969–1972): Introduced suspended pedals attached to a new pedal box under the instrument panel (except for right-hand drive cars, which kept the floor pedals due to a lack of physical space near the carburetors). The braking system was upgraded to a dual safety circuit. Visually, it adopted slimmer bumpers with integrated rubber overriders and dashboard instruments with more pronounced cowls.

2000 GT Veloce (1971–1977)

Equipped with the 2.0-liter (1,962 cc) engine producing 130 to 132 horsepower, the 2000 GTV replaced the 1750 model. The top speed rose to 195 km/h, and the 0 to 100 km/h acceleration time fell to about 9 seconds.

Visual modifications included a new front grille with horizontal chrome slats that formed the outline of Alfa Romeo's traditional central shield, significantly larger integrated taillights, and wheels with small center caps exposing the lug nuts, with the option of "Turbina" style sports alloy wheels. The interior lost some of the wood trim on the dashboard, and all instrument dials were concentrated directly behind the steering wheel, improving driver visibility. Mechanically, the car received larger brakes and a limited-slip differential (LSD) as standard equipment.

In 1965, Alfa Romeo created the "Junior" sub-brand with the launch of the GT 1300 Junior. The main goal was to offer a sports coupe with lower acquisition and maintenance costs, bypassing the strict Italian tax legislation that levied very heavy taxes on vehicles equipped with engines over 1.3 liters.

The 1,290 cc engine produced 89 horsepower, providing a top speed of 170 km/h, an excellent mark for a car of that displacement at the time. The model retained the same dynamic qualities as its older siblings, although it used a simpler interior finish, a flat dashboard, and a front grille with only a single horizontal chrome strip.

GT 1600 Junior (1972–1976)

Introduced in 1972, this model used the classic 1.6-liter (1,570 cc) engine with 108 to 110 horsepower to fill the market gap between the GT 1300 Junior and the top-of-the-line 2000 GTV. Initially, the exterior look maintained the two-headlight configuration and simplified trim.

The "Unificato" Phase (1974–1977)

To simplify production at the Arese plant, Alfa Romeo decided to standardize the bodies starting in 1974. With this unification, both the GT 1300 Junior and the GT 1600 Junior received the same bodywork and interior trim as the 2000 GTV, including the four-headlight front end.

The only external differences of the Unified Junior models compared to the GTV were:

• Absence of overriders on the front and rear bumpers.
• Absence of the classic green serpent logo (Quadrifoglio) on the rear pillars (C-pillar).
• Presence of the written logo "GT 1300 Junior" or "GT 1600 Junior" on the trunk lid.

Mechanically, the Juniors retained smaller front disc brakes and specific gear and differential ratios to suit their smaller displacement engines.

Additionally, Alfa Romeo offered variants with an extremely aerodynamic and futuristic two-seater coupe bodywork, designed by Ercole Spada for Carrozzeria Zagato in Milan. The GT 1300 Junior Zagato (1,108 units between 1969 and 1972) and the later GT 1600 Junior Zagato (402 units between 1972 and 1975) were produced.

All engines used in the Tipo 105 were part of the renowned Alfa Romeo Twin Cam family. They featured cast aluminum blocks and cylinder heads, a five-bearing crankshaft, and hemispherical combustion chambers with two valves per cylinder actuated directly by two overhead camshafts.

The fuel delivery system featured two twin-choke side-draft carburetors (Weber, Solex, or Dell'Orto) on most versions, or SPICA mechanical fuel injection for American market models. The transmission was always a five-speed synchronized manual, transmitting power to the rear wheels.

The following table presents the structured and consolidated technical details of all versions of the Tipo 105 series:

The Alfa Romeo Giulia coupe and convertible line based on the Tipo 105 chassis represents an indelible milestone in post-war automotive engineering. By combining structural lightness, refined light-alloy double overhead camshaft engines, and the elegant design conceived by Bertone and refined by Touring, the Milanese manufacturer created a lasting benchmark of sportiness and practical design.

The market success of these different generations and facelifts highlights the success of Alfa Romeo's strategy in diversifying its portfolio between the fast GTV models and the smart Junior models, ensuring enthusiasm on the tracks and high sales volume on the streets. Today, these vehicles are coveted worldwide as icons of style and dynamic performance of their era.